First how to install the SFP Module? Optical fiber mode of GbE gigabit switching module contains a SFP with coil. SFP module is to convert electrical signals into light signal of laser products. Before install the SFP modules, we need to know that on the surface of SFP module there designs an integrated guide groove, the purpose is to prevent the user to put in the wrong direction when installation and location. when you insert the SFP modules, please use as little power as possible, because if you force the SFP modules propulsion SFP modules interface, it might damage the SFP modules or SFP modules interface. And SFP modules must be inserted into the SFP module interface to connect optical fiber cable properly, then another point we need to pay attention to is that you must pull out optical fiber cable from the SFP modules and then the SFP modules can be removed from the GbE exchange module.

Well, how to install the SFP modules? Here are some need to be aware of. If you install SFP modules under the condition of the electric, release the switch button must be dealt with half-open state, so that you touched the SFP modules linker 1.2 and 3. Warning: when installing laser products (such as a CD-ROM, DVD drive, fiber optic equipment, or the transceiver), pay attention to the following items: Don’t open the lid of the products. because open the lid is in danger of from laser radiation. Within the device there is not reusable service components. It is better to use control button or a program to adjust performance, don’t choose to use what you may be exposed to a laser. But there I would introduce SFP module to you, SFP-10G-SR in Fiberstore, this Cisco SFP 10G SR multi-mode transceiver is SFP+ module for duplex optical data communications such as 10GBASE-SR and 10GBASE-SW. This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm.and it has a very high cost performance.

How to connect the fiber optic cable to SFP modules? When installed on the gigabit exchange module after the SFP modules can connect the fiber optic cable to the SFP modules. As for SFP cable, SFP-H10GB-CU1M is a quite well choice, the Cisco SFP-H10GB-CU1M in Fiberstore are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. How to deal with the optical fiber cable? Note: in order not to damage the optical fiber cable, please follow the following guide to action.

1. Do not use optical fiber cable with folded arms furl.

2. When the spool of data to a trough, leave enough space (don’t let the cable into less than the radius of the 38 mm), make cable can h free scaling.

3. Straighten out the cabinet will cable don’t let it twisted together with other equipment

4. Do not place in tightly rolled up (radius of not less than 38 mm).

5. Don’t push too much pressure. You just need to confirm cable is supported.Installation of fiber optic cables

Complete the following steps to connect the fiber optic cable to the SFP modules:

1. remove optical fiber cable port of protective cap

2. install a good SFP optical fiber cable connected to the module

3. check the exchange module on the LED lights.When the normal work of the switching module, long green connection state of the light is bright.Pull out optical fiber cable

Fiberstore is an industry’s leading supplier of optical communication products, its products are widely used in telecommunication systems and data communications network. Fiberstore engineers and controls the photoelectric device, optical components, modules, design, manufacturing, research and development of core technology and experience. Fiberstore will be able to offer our customers a full range of optical transceiver module, integrated GBIC series, the series of SFP, SFP+ series, XFP series, series of SFF, EPON ONU/OLT, GPON, range from the low rate of 1m to 10G products. With the strong compatibility of the products what exactly match the mainstream manufacturer’s equipment.Quality assurance in strict accordance with industry standards, and can provide the customized service according to customer’s actual application. And it is vary nice that Fiberstore is working with the price at a discount of 30% now and welcome you to visit and buy from our online store.